THE WAY YOU CREATE DIABETES IN RATS IN THE LAB IS BY EXPOSING THEM TO 2.4 GHZ
Wireless radiation ... have been clearly associated with elevated levels of blood sugar and diabetes. THAT IS WHAT THE PEER REVIEW LITERATURE SAYS. IT IS NOT OPINION. THE CLOSER YOU LIVE TO A CELL TOWER, THE HIGHER YOUR BLOOD GLUCOSE.
Wireless radiation has biological effects. PERIOD. 5G is not a conversation about whether these effects exist. THEY CLEARLY DO.
The Facts:Dr. Sharon Goldberg, an internal medicine physician & professor gives her testimony regarding the dangers of electromagnetic radiation. She says: “Wireless radiation has biological effects. Period."
Reflect On:Are you aware of the dangers of 5G and 4G radiation from our internet, cell phones and computers? What do you do to mitigate these effects? Do you limit your exposure to these items throughout the day?
5G is a new technology currently being implemented and continually going through the process of implementation in many areas. It will bring wireless data and internet connections to the world. But, recent research has shown great cause for concern with regards to our electromagnetic radiation exposure, not just 5G, but all sources of this radiation that surround us, from our wireless devices, our wireless routers, cell phone towers and more.
It is with great excitement, and appreciation to the inventor, that Nexus publish the following information on the Permanent Magnet Electric D.C. Motor Generator of Robert Adams, a former Chairman of the Institute of Electrical & Electronics Engineers, Inc., U.S.A., (N.Z. Section).Afer having his invention suppressed for over 20 years, Mr Adams, at the age 72, has decided to share his design with the world regardless of the consequences. Mr. Adams' quest to bring "free" energy to the world has cost him dearly, as it has many other researchers who threaten to bring the "establishment" undone.
He has survived an attempt on his life by an individual affiliated with the New Zealand Secret Intelligence Service and the Central Intelligence Agency, direct suppression of his invention by former (and recently deceased) Prime Minister of New Zealand, Roben Muldoon, the giant British electronics company, Lucas Industries, as well as numerous other insurmountable difficulties that have been placed in his path. All because his invention worked. And not only that, it is so simple, any electronics manufacturer or skilled backyard-home-scientist could build one!
INVENTORS BEWARE!
In 1978 Mr. Adams discovered that inventors of machines or devices of high energy efficiency capability ("Free" Energy) are not only refused patents, but that in most cases, their inventions are classified under the "Military Use Clause", which is, of course, international. Inventors are prohibited from publishing details of their devices or promoting them in any manner if their invention is classified under this clause. In other words, their devices automatically become the sole property of the "establishment".The fact that there is an established mechanism to suppress energy inventions of this nature has been a closely guarded secret for many years. Many inventors have made such claims, but the general public rentain oblivious to the fact that they are being deprived of clean and free energy by organisations that would rather make money and hold power over We public, than allow such technology to become widely available. Yet another example of the abuse of power. (No pun intended.)
See Conspiracy - Article by Robert Adams
"FREE" ENERGY
This motor generator would be called a "Free Energy" machine by most individuals. It is, in fact, a device that converts the perpetual motion of sub-atomic particles, known in physics terminology as "particle spin", into conventional electric power. It is a widely accepted fact of physical law that sub-atomic particles are in a state of perpetual motion. Anybody who tells you that there is no such thing as perpetual motion is either ignorant or a liar, As Robert Adams states, "Our universe is a sea of energy - free, clean energy. "It is all out there waiting for us to set sail upon it" Adams has built a number of permanent magnet electric D.C. motor generators based on the principle outlined in this article, some of which have demonstrated an electrical efficiency of 690% and a mechanical efficiency of 620%. The devices run at room temperature. Any device that doesn't could not be running at over 100% efficiency, as heat is the major result of hysteresis losses that are induced in any conventional electric motor or generator. Radiated heat is a sure-fire sign that a power generator is not running over unity, as all heat radiated by such a device is wasted energy. I will remind readers once again at this point that Mr Adams is not a fly-by- night, propeller-head, whacko, techno-boffin. He is an electrical engineer with over 60 years experience in the field of electrical engineering, which has included designing and building equipment for use in power stations, broadcasting facilities, airport communications centres, etc. He is a former Chairman of the Institute of Electrical & Electronics Engineers, Inc., U.S.A., (N.Z. Section), and his resume includes personal referees ranging from a former New Zealand Commissioner of Police, a former Chairman of Air New Zealand, (and several technical specialists from the airline), as well as an Ex- NASA scientist. Nexus would recommend to anybody interested in, or presently building a device of this nature, to try building a device based on Mr. Adams plans. His machines have demonstrated the ability to generate free energy, unlike most of the theoretical models that are promoted as over-unity devices.
GENERAL DESCRIPTION
The invention may be broadly said to be, an electric motor and/or generator comprising a rotor consisting of a number of radially arrayed permanently magnetised poles, and a stator consisting of a number of radially arrayed permanently magnetised poles, together with a number of wound poles. The rotor's permanently magnetised poles use ferite magnetic cores, and may comprise any even number of poles. The stator's wound poles employ steel or iron cores. The device is essentially a D.C. machine, but may be fed A.C. input with the use of a solid state convertor.The Rotor uses a number of similar polarity permanent magnetic poles, i.e., all-South or all-North. A further set of wound poles are radially arrayed in the stator, and are arranged in such a manner as to be fed energy, that is excited by back E.M.F. energy, from the poles of the rotor.
Associated circuitry is provided to feed the energy back to the drive poles of the motor.
The resulting characteristics of this design is that once the rotor is moved from the position of equilibrium, each pole is attracted to, or repulsed by the stator poles, but at a precise geometrical point with respect to them, the input current to the drive coils ceases. As a result, the collapsing field current is in the opposite direction to the applied force, thus reversing the magnetic polarity of the stator coils. This forces the rotor poles away (reaction), which is the instantaneous response of a system to an applied force, and is manifested as the exertion of a force equal in magnitude, but opposite in direction to the applied force.
Pulsing the D.C. input current, overcomes losses generated in conventional motors. According to classical electrical engineering theory, efficiency is greater the more nearly equal the Back E.M.F. (electromotive force) is to the applied voltage, i.e. the lower the input current. Figure 6 shows that there is minimum 100% back E.M.F. relative to the supply source of input D.C. voltage (according to classical electrical theory), which virtually depicts a sine wave due to the effect of the collapsing field.
This effect also overcomes the electrodynamic torque problems associated with conventional motor designs. (As input power varies with the duty cycle pulse; i.e. the lower the input current, the lower the input current, and the lower the speed, the greater the torque.) At clipoff, the badk-EMF ceases, the collapsing field takes over, opposing the outgoing rotor magnet and thus increasing momentum. With this design force is applied twice during each D.C, pulse, with pulse-on, and with pulse-off.
The timing of the pulses are determined by the dimensions of the motor itself, i.e. the speed of rotation of the motor's central axle, the position of the rotor magnets in relation to the stator windings, as well as the distance that the rotor magnets travel when passing across the poles of the stator winding.
Fig. 1 to Fig. 4: How to calculate the D.C. pulse timing of the stator coils on the Permament Magnet Electric D.C. Motor Generator.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5: Outline showing how double force pulse is produced by a single switched D.C. pulse.
Fig. 6: Graph showing oscilloscope trace of characteristic voltage across stator windings.
CONSTRUCTION AND OPERATIONAL NOTES
Important Factors
Care must be exercised when assembling and wiring the drive windings to make sure that their polarities match the rotor magnet polarity.
Common earthing must be avoided in order to preclude voltage and/or current loops. (If a number of drive windings do need to be commoned, use very low resistance conductors and employ a transmission type earthing system only.)
Stator (Drive) winding resistances are your choice. Robert Adams' machines were built varying from 0.03125 to 27 ohms per set, He has experimented with two, four, and eight pole machines. Efficiency increases with the number of wound poles in the stator.Motor generators with a single, two, or three phase can be built to this design. A number of rotors may be ganged together on the same shaft in order to increase power output and does not require the use of any commutator, brushes or slip rings, all of which contribute to energy losses in ordinary motor generators.
Unlike conventional Series D.C, machines, this motor can be off-loaded, finds its own speed, and will run at that speed indefinitely. A conventional DC motor will run itself to destruction with off-loading. It requires no cooling, nor any overload protection, even if short circuited.
A number of highly qualified individuals have seen these devices running and producing energy at well above 100% efficiency. Let's hope that some of you can achieve similar results.
GENERAL CONSTRUCTION AND TESTING PROCEDURES OF THE ADAMS MOTOR GENERATOR
An ideal drive winding pole can be very readily available by obtaining some B.P.O: 3000 type relays (ex Telecom). Simply remove present wmding, cut core in half, re-thread, assemble and fill with winding. This is a quick and cheap method of obtaining a very high quality non-retentive steel core. As aforementioned, winding resistances used by the inventor varied between 0.03125 to 27 ohms.The above windings described are ample to drive prototypes even in a 180' application. You will find speeds up to 2500 rpm with only two of these windings 180' apart - no problem.
For A,C. Output Coil Windings and Core: Ideal cores can be built cheaply and quickly by dismantling a spare power or audio transformer and utilising the 'I' section laminations, obtain winding former to fit same and it is ready for winding. Turns and gauge will depend on what voltage and current you choose. Remember, at this stage, you should only be building a demonstration model, so to speak.
After a few changes, corrections and/or general modifications you will be ready to put a mechanical and/or electrical load on the machine. For an electrical load it is suggested you firstly wire up a bank of 6 - 12 LEDs. If everything is go, then switch over to torch lamps: Later on with a bigger machine - car lamps, or maybe household lamps and a mechanical load simultaneously.
For Efficiency Testing
Milliamp meters are useless for this machine - do not use for testing. Use only high quality digital true RMS meters, with input power, for high accuracy, use only a high quality electronic wattmeter: These instruments measure extremely accurately any wave-shape. A good twin-beam oscilloscope is a must: So too a high quality electronic temperature-measuring instrument with appropriate probe.
Drill dead centre of one or both cores, as per drawing. Probe be must be good fit. If, after one hour of running on load and temperatare is around 40 degrees, that will indicate things are most likely working correctly.
Don't forget your ambient in Australia will be considerably higher than ours. Read the inventor's rotary and solid state efficiency measurarnent data sheet.
Rotor-stator air gap is not critical, but the closer the better.
As stated elsewhere, the stator pole faces, if desired, may be reduced to 25% of the rotor pole face area, hence large drive windings and high drive current is not required.
With care to detail, correct mathematical calculations and high quality instrumentation correctly utilised, incredible results can be expected. Study data submitted shows those results have been attained on several machines.
Temperature of conventional machines internally reach boiling point after fifteen minutes running. Check the Adams Mctor Generator after running on full load for 48 hours, or after fifteen minutes if you prefer not to wait that long. You will be very pleasantly surprised - I refer to maximum loading conditions, not free running.
Mechanical Loading Test:
A high quality strain measuring instrument must be used in the universal "pony brake' method of mechanical load testing.
RPM tests must also be obtained with a high quality tachometer and/or oscilloscope reading and use the universal equation to calculate mechanical machine efficiency.
Note: Very Important Factor:
As you increase duty cycle, current input will increase and efficiency will decrease. From random test sheet results I have chosen it is very clear what to expect upon increasing duty cycle.
Note:
The Adams Motor Generator is so efficient, so simple and consequently it's construction is such that it surpasses overwhelmingly anything before it, thus lending itself admirably to mass production.
One of a number of unique features of the Adams Machine is the fact that the same rotor poles are utilised simultaneously for driving the machine and generating output energy.
Construction Equation - Adams Motor Generator - 20/12/76
It was found, after considerable development work, that maximum electro- magnetic effect produced in the stalloy stacked generating pole windings occurred when the dimension of the mating end of the stacks were four times greater in area than the rotor magnet's pole area. Hence the overall design of the machine incorporates this derived ratio of one to four. (The Adams Equation, as applies only to the Adams Machine).
Feedback - 20/12/1976
The feedback, produced by the output generating coil, produces a polarity reversal normally resulting in large eddy current losses in conventional machines, but, in the Adams Machine, it is hamessed to develop further additional torque to the magnetic rotor. The larger the output generating coils the greater the torque delivered to the rotor.
Power Factor- 1/7/1976
There is no power factor loss leecause the Adams Machine runs in a condition of resonance. Therefore, the Power Factor Loss is zero.
from http://dailynativenews.site/2018/03/herb-that-is-100-times-stronger-than-chemo-drugs-and-kills-cancer-in-2-days
HERB THAT IS 100 TIMES STRONGER THAN CHEMO DRUGS AND KILLS CANCER IN 2 DAYS
The root of this plant is able to eliminate cancer cells and protects the rest of the cells.
This is an amazing news for people who are suffering from cancer. Under a scientific study, it is observed that the consumption of dandelion tea can help you to dissolve the cancer tumor in just 2 days.
It is a very welcoming news for the cancer patient. Dandelion is well known for its medicinal properties and health benefits. It is very simple to make dandelion tea. And additionally along with cancer dandelion tea is capable of curing many other ailments.
Researchers have found that dandelion root is more efficient than chemotherapy. An experimental study led by researchers at the Department of Chemistry and Biochemistry, the University of Windsor, Canada has affirmed that the foundation of this plant can take out tumor cells and secures whatever is left of the cells. There is most likely this data will fulfill tumor patients.
The base of dandelion can successfully wipe out disease cells in under 2 days.On account of the outcome they have, these researchers could get support for another study that will give more replies about the proficiency of dandelion root and how we can get the greater part of it.
The 72 year old John DiCarlo, had benefits of this root. He had cancer and treated it for almost a month. But he changed something when he tried the dandelion tea. He was in remission after 4 months.
Pass on this outstanding information among your loved once so that maximum cancer patient can take advantage of this simple treatment.
The advantage of this treatment is that it is free from side effects and cure cancer quickly as compared to the conventional methods
According to Miniwiz,
"Once stationed, the TRASHPRESSO container opens much like a satellite
unpacking in orbit. Trash is collected locally, then washed, shredded,
melted, and molded through an automated process. The water required for
cleaning the trash is reused by being cycled back into the process." The
Trashpresso machine was unveiled in Shanghai on Earth Day 2017, and
documented by National Geographic for the new documentary series "Jackie
Chan Green Hero."
According to NewAtlas,
the Trashpresso will be deployed in July of this year "to clean up the
glacier region of NianBao Yuze, which sits on the Tibetan Plateau and
feeds into the Yellow, Yangtze and Mekong rivers," and which has seen a
recent increase in litter due to growing tourism.
"Until
now, industrial grade recycling was limited to plants. The Trashpresso
overcomes the distance and energy barriers by showing that recycling is
possible everywhere. Not only does it serve to transform trash on-site,
it also serves as an educational tool in isolated communities." - Arthur
Huang, co-founder and CEO of Miniwiz
Taiwain-based Miniwiz has been working on waste-to-materials since 2005, and has developed products like Polli-Brick, a building material made from 100% recycled PET plastic, as well as designing and building store interiors from waste-based materials for such companies as Nike.
In early May of 1997 I learned about a gentleman from the
Northwest who knew of some new techniques for making ORMUS. I learned
of this gentleman from an ORMUS colleague named John. John and I
arranged to drive up and meet with this fellow.
When we got there we were greeted by a short, dark haired fellow in his
late fifties. He gave us permission to record our conversations but
requested that we keep his name and contact information anonymous. When
we eventually put the methods that he taught us on the Internet we
decided to call this gentleman the Essene because he did not want his
real name revealed.
The Essene told us that he has always remembered
a past life
as an Essene on the Dead Sea. He said his first memories of this came
when he was living on the coast as a child.
He said that at the age of six, he was allowed to go fishing on the
pier by himself. He caught some fish and put them in a bucket but
decided to dump them and fill the bucket with ocean water instead. He
took this water home and added lye to it till precipitate fell out.
Remembering the process from his life on the Dead Sea, he washed the
precipitate and ate it. He says that he has been eating this in one
form or another till the present.
We learned how to make the white precipitate of
sea water using the Wet Method from
the Essene on May 18, 1997.
About a year after my first visit with the Essene I
wrote an article on ORMUS in Paramagnetic
Forest Soils in which I speclated that ORMUS
might have amazing agricultural and ecological benefits if applied to
plants.
I actually visited the Essene at his place four times.
The third time I visited him in October of 2000 he showed me some giant
walnuts that he said were grown using the Wet
Method ocean water precipitate as a mineral supplement. He called
this precipitate C-11 (or Sea-11) because he said it contains eleven
m-state elements from sea water.
You can read the story of these giant walnuts here:
The benefits of ORMUS for plants are generally
best realized by the Wet Method
precipitate from salt sea water. Here is the Wet Method in
review:
Slowly bring the pH of ocean water, Dead Sea water or
raw sea salt (dissolved in water) up to 10.78 and no higher using a
tablespoon of lye (sodium hydroxide) dissolved in ½ cup water.
Let the resulting precipitate settle, siphon the clear
water off the top and add fresh water to wash it.
Repeat the second step three or four more times.
As the pH is raised to 10.78 you will notice that the pH
seems to hang for a long time around pH 9.8 - 9.9. This happens
because the lye cannot raise the pH as long as it is being used up in
reaction with the ORMUS and magnesium in the sea water. This pH curve
looks something like this:
Once you have the precipitate it is very important to apply it at the
appropriate rate. It is typically applied at the rate of one to three
gallons per acre (ten to thirty one liters per hectare) for each crop.
(This is usually just once a year for trees but will be with each
planting for grasses which get multiple cuttings.)
I
have calculated the application
rates for ORMUS precipitate in agriculture and Sea-Crop,
one of the ORMUS providers, also has a page on this at:
In August of 2003 I gave a series of presentations on ORMUS in
North and South Carolina. These presentations were arranged by Dana
Dudley. After hearing about how to do the Wet Method in one of my
workshops Dana told me that she was working with some folks who had
been using ORMUS precipitate from Great Salt Lake water for plants.
Dana contacted these folks and got some ORMUS Oranges from them. These oranges were
four and a half times as large as ordinary supermarket oranges.
Home gardeners are also sharing amazing results with the use of ORMUS
precipitate on their plants. If you are interested in documenting and
sharing the results you are getting with plants I have created a page
with helpful suggestions at:
At one of my ORMUS Workshops on May 16, 2004 I showed some folks how to
make the ORMUS precipitate with Dead Sea salt. I gave the precipitate I
made to several people and one of these people, a woman named Jane,
wrote me a note telling me what she had done with the precipitate I
made:
From: Jane
Subject: The Rose
Date: Sun, 18 Jul 2004 12:35:00 -0700
The roses are still alive, and growing. The first went into ORMES
right after your second workshop in Kingston [May 16]. The second
went into the same solution a month later. Both were cut long
stem roses from the supermarket.
In October of 2004 Jane sent me a video
description of this rose plant. The cut rose was still alive and
growing in a bottle of water five months after her husband gave it to
her.
A gentleman named Ted had several plant boxes on his deck. A couple
days after he heard me talk about ORMUS at a lecture in Ashland on May
2, 2005 Ted watered his plants with Pacific Ocean ORMUS precipitate.
When I returned to Ashland on May 20, 2005 Ted gave his report on the effects of the precipitate on his
plants.
From all of these observations we are quite confident of the following
results:
There are also indications that animals receive great
benefits from eating plants which have been grown with ORMUS. In an on-line
book titled HEALTH & SURVIVAL IN THE 21st CENTURY by Ross Horne
we find the following passage:
Started feeding mice both
experimental and control, food that was raised on the Ray Heine and
Sons Farm. The experimental food had been raised on soil fertilized
with 2200 pounds (per acre) complete sea solids. The control food was
the same as the experimental with the exception that it was not
fertilized with complete sea solids. The food consisted of a
combination of one part soybean, two parts oats, four parts corn,
balanced food proteins, carbohydrates and fats for mammals.
C3H mice were obtained for this feeding experiment. This
strain of mice has been bred so all the females develop breast cancer
which causes their demise. The mice were two months of age when
received and started on the feeding experiments. The life expectancy of
this strain for females is no more than nine months which included the
production of two or three litters. The experimental and control groups
both consisted of 200 C3H mice and those fed on control food were all
dead within eight months seven days. The experimental mice that were
fed food grown on the sea solids fertilized soil lived until they were
sacrificed at 16 months; definitive examination revealed no cancer
Though this experiment was done with whole sea solids
(including the salt) I think we can presume that these benefits will
also apply to animals that eat plants grown with the ORMUS precipitate.
ORMUS
CHEMICAL PRODUCTION TECHNIQUES
[Back to first page]
This document may not be reproduced except in its entirety, and without
changes. Before trying any of the procedures described in this document,
we advise you to thoroughly read this document several times.
This document was created by a group of people who believe that this
information is of inestimable value to humanity and should be made widely
available as soon as possible. The information here is declared to be in
the public domain and we wish that it not become the sole property of any
individual or group.
Here we describe some simple ways of making ORMUS so that readers can
begin true scientific and intuitive experiments with these materials.
All of these methods are experimental. The following information
is presented to promote scientific research into the nature of these materials.
Although these methods are based on our best knowledge at this time, further
scientific research may prove some of these processes or theories to be
inaccurate.
DISCLAIMER
The processes described here have not all been tested extensively. We do
not guarantee the procedures in this document, nor the results obtained
by using them. To the extent that you use or implement these procedures
or the products thereof, you do so at your own risk. In no event will the
authors of this document be liable to you, anyone else, or any organization
or government, for any damages arising from your use, or your inability
to use these procedures or the product thereof. Apply these procedures
at your own risk.
VERIFICATION
The material made by some of these methods has been tested by an independent
lab using X-ray fluorescence and photo spectrometry to identify the emission
spectra of m-state materials. (The lab prefers to remain anonymous).
The m-state spectral emissions signature was a broad, flat band rather
than discrete lines. The test also showed a significant amount of
calcium and magnesium, but no toxins were evident in well-washed material
made from unpolluted ocean water.
To further prove that these materials are a different state of the precious
elements mentioned above, it is possible to electroplate these elements
out as precious metals.
People familiar with Hudson's process claim that the materials produced
using these methods are similar to Hudson's ORME materials.
INGESTION
We do not recommend the ingestion of these materials since so little is
known about them. This information is being provided so that scientific
inquiry can commence into the nature of these materials. We realize that,
despite recommendations to the contrary, some people will ingest these
materials. With this in mind we offer the following information to minimize
any possible adverse effects from ingesting these materials. Please read
the WARNING and CAUTION
sections.
Some people have ingested the m-state materials made by these methods.
They suggest that benefits are most likely when dosage is kept small.
Three methods of making ORMUS are described in this document: the WET
method, the DRY method, and the BOILING GOLD method. For the materials
extracted by the wet and dry procedures, one teaspoon of material, morning
and evening, has been found by them to be not harmful over several weeks'
time. A much smaller dose, on the order of a few drops a day, would be
more appropriate for the material produced by the boiling gold method.
We believe that the m-state may be homeopathic, so a much smaller dose
may be the safest -- such as 1/64 teaspoon diluted in one quart of pure
water, taken two or three ounces once or twice a day.
David Hudson gave some information on dosage in his Dallas speech at:
http://monatomic.earth.com/david-hudson/1995-02-dallas-toc.html
WHITEGOLD WEB PAGE
You can find a discussion forum on the WhiteGold Web page. There you can
post comments and questions on these procedures, and on ORMUS in general.
WhiteGold Web page: http://www.zz.com/WhiteGoldWeb/
This document describes three methods of producing ORMUS: the WET method,
the DRY method, and the BOILING GOLD method.
All three methods use a chemical lab technique called "measuring pH."
The pH of a solution is a measure of its acid/base ratio. You may remember
testing pH with litmus paper in high school. pH values less than pH 7 indicate
an acid, like distilled white vinegar. pH 7 is neutral, like pure
water. Greater than pH 7 is alkaline, like lye.
ORMUS precipitates between pH 8.5 and 10.78.
The WET method produces the least "effective" material but is relatively
simple to perform.
Here is the basic WET method in brief.
It will be discussed later in detail:
1. Start with drinkable water or clean sea water.
2. Slowly add a solution of lye mixed with water to raise the pH above
8.5 but no higher than 10.78.
3. A white fluffy precipitate will form which you should allow to settle
overnight.
4. Remove the liquid above the precipitate.
5. Thoroughly wash the precipitate. It is calcium hydroxide,
magnesium hydroxide, and a small amount of m-state material.
Here is the DRY method in brief:
1. Start with dry mineral powder.
2. Boil it in lye water at pH 12.
3. Filter and discard the precipitate.
4. Add distilled white vinegar or hydrochloric acid (HCl) to the filtered
liquid to lower the pH to 8.5.
5. Let the precipitate settle overnight.
6. Remove the liquid above the precipitate.
7. Wash the precipitate. That is calcium hydroxide, magnesium
hydroxide, and a small amount of m-state material.
And here is the BOILING GOLD method
in brief [the BOILING GOLD METHOD has never worked
for those who have tried it and we don't recommend its use]:
1. Boil gold dust in a lye solution.
2. Filter out any solids.
3. Add distilled white vinegar or HCl to the remaining liquid to lower
the pH to 8.5.
4. Let the precipitate settle overnight.
5. Remove the liquid above the precipitate.
6. Wash the precipitate. It is almost pure gold m-state material.
NECESSARY SUPPLIES TO MAKE M-STATE
A glass or stainless steel pot. If you use stainless-steel pots, check
for steel particles in your precipitate. Although unlikely, this problem
may occur if you use large amounts of HCl to lower the pH. Never
use aluminum containers or utensils because aluminum will react with acids
like HCl and alkalis like lye, and will poison you.
Distilled water from a grocery store.
A stainless steel spatula or knife for stirring, from a grocery store.
Never use aluminum containers or utensils because
aluminum will react with acids like HCl and alkalis like lye, and will
poison you.
A few glass jars. Tall skinny ones work best.
Lye (sodium hydroxide or NaOH). We will use the term "lye" in
this document rather than "sodium hydroxide" or "NaOH" since it is shorter
and more familiar to most people. Grocery store lye, such as Lewis
Red Devil Lye, is not as pure and uncontaminated as laboratory or food-grade
lye. We strongly recommend that laboratory or food grade sodium hydroxide
be used if the m-state is intended for ingestion since grocery store lye
may contain dangerous contaminants. Note: Virtually no lye will be
present in the final product so it will be safe to ingest. In any
case, lye is not toxic, and it is not caustic when sufficiently diluted
(as in these methods).
HCl (hydrochloric acid or muriatic acid). We will use the term
"HCl" in this document rather than "hydrochloric acid" or "muriatic acid"
since it is shorter. You can use muriatic acid (31% HCl) from a hardware
store, but laboratory, electronic or food-grade HCl is less likely to be
contaminated. We strongly recommend that laboratory, electronic or
food grade hydrocholoric acid be used if the m-state is intended for ingestion
since muriatic acid from a hardware store may contain dangerous contaminants.
The presence of iron as a contaminant in the acid may interfere with the
m-state materials in some applications.
Three eyedropper bottles from a pharmacy. An alternative to eyedroppers
is squirt bottles made of HDPE. Find them at a natural foods store
or other store which sells bulk liquid products like vegetable oils or
lotions.
A large 50 cc plastic syringe from a veterinary supply shop or a lab-supply
house. Some suppliers are listed near the end of this document under LAB
SUPPLIES.
pH paper or a pH meter. You can get pH paper (pH 1 to 12) from
a lab-supply company or a mining supply store. Use new paper because
old paper becomes inaccurate. Some suppliers are listed near the
end of this document under LAB SUPPLIES.
pH PAPER OR pH METER?
Some experimenters say not to rely on a pH meter because its readings vary
with temperature and ionization. Also, a meter costs much more than
pH paper. Many pH meter probes can be damaged by very strong acids
or alkalis. But some say that a pH meter is essential, for these
reasons:
pH paper cannot track rapid changes in pH.
pH paper does not resolve pH readings finely enough. It's hard to
tell the difference between pH 9.5, 10.0, and 11.5.
pH meters are best used to get accurate readings between pH 8.5 and 10.78,
which is the main range of concern in these methods.
pH meters can spot check any reading with a standard buffer solution.
a pH meter is more convenient.
Use only a meter that has an automatic temperature-correcting function
up to 100 degrees C.
SAFETY TIPS
Clean your containers so that you'd feel safe drinking out of them.
Boil containers, syringes, siphons and so on before use to sterilize them.
CAUTION!! Lye can damage the eyes by rendering the cornea opaque, a form of eye
damage that is irreparable. Lye can burn skin, clothes and eyes.
Work near a sink, faucet, or other source of wash water. You might
keep a spray bottle of distilled white vinegar handy to use against spills.
If you spill lye on your clothes or body, immediately wash it off with
lots of water. When working with lye, avoid touching your face or
rubbing your eyes. Do not handle lye around food. Use adequate ventilation
such as a range hood. Do not dump waste water on the ground.
Lye is generally safe to put down the drain, but don't mix it with any
acid that may be in the drain as it can react explosively.
When working with lye, please wear goggles or a full-face visor (an
industrial face protector), neoprene gloves, and a PVC lab apron.
Sources for this safety clothing are in the Appendix
near the end of this document.
Keep children and pets away from the work area, and do not leave it
unattended if children or pets are around.
Glass can shatter with hot liquids. Pour boiling liquid from your
heating container into a stainless steel mixing bowl to cool before pouring
the liquid into a glass container.
THE WET
METHOD
STARTING MATERIALS FOR THE WET METHOD
Some starting materials produce a lot of precipitate, while others do not.
Listed below are materials that have been shown to produce some precipitate
from the WET method:
Some municipal drinking water
Some hot springs water without sulfur
Trace Minerals Inland Sea Water
Urine
Some lake or river water whose bed or course is limestone.
Some well water. Ground water is probably more likely to contain
m-state than surface water (except for sea water).
Sea water and sea water reconstituted from certain brands of sea salt,
especially from the Great Salt Lake.
Dead Sea water.
Certain brands of unrefined sea salt are as good as sea water: Celtic Gray
Sea Salt (from health food stores) and Lima Atlantic Sea Salt (from some
health food stores). Add distilled water and use the WET method.
Filter the scum first.
The WET method performed on ocean or Dead Sea water produces eleven different
m-state elements.
The following materials are ranked in order from most to least m-state
content:
1. Dead Sea water
2. Salt Lake water
3. Ocean water
4. Well water
Listed below are materials that have been found to produce little or
no precipitate from the WET method:
Water from some alkali lakes (pH above 8.5).
Hot springs with sulfur (because sulfur reduces m-state to metal).
Mineral-free lake or river water
Dead Sea mineral salts that contain sulfur or sulfates, such as "Sea Mineral
Bath from the Dead Sea" by Dead Sea Works Ltd. for Sea Minerals Co., and
Trace Minerals Research "ConcenTrace Trace Mineral Drops" from the Great
Salt Lake.
For the following methods to work, some researchers claim that magnesium
or magnesium hydroxide -- Mg(OH)2 -- must be present in the starting material.
(Since the Boiling Gold method is effective without any magnesium, this
claim will need to be tested.) Sea water already has Mg(OH)2, so
you don't need to add it to sea water. Try your water first.
If you don't get any precipitate, you might add a teaspoon per gallon of
Epsom salts to the starting material for its magnesium. If you do
add Epsom salts, the magnesium from them will be a large portion of the
precipitate.
WARNING!! PROBLEMS ENCOUNTERED
The following problems have been encountered by some folks who have
made m-state for consumption:
Some people have gotten quite sick from consuming m-state made from sea
water collected at a marina. This water contained high levels of
lead and other contaminants.
Other people have gotten quite sick from consuming m-state materials which
were made improperly. These materials were made without the use of
pH test paper or meters and the resulting material contained toxic metals.
Please remember that old pH paper can become inaccurate.
People have gotten sick from consuming m-state materials which contained
bacteria because they were not sterilized or stored properly.
It is possible to bring the pH of your source material up too quickly,
especially if you use lye in too high a concentration. This could
result in local areas of very high pH within your solution. These
high pH areas could allow toxic metals to precipitate and mix with your
desired precipitate.
M-state platinum might be considered toxic by some since it makes you quite
ill if you consume alcohol. No one has reported this effect from
consuming m-state from sea water.
Some people have used Teflon® coated aluminum sauce pans for heating
lye or lye water. The Teflon® got scratched and the aluminum
started dissolving in the lye water producing hydrogen gas which could
have exploded. The liquid was contaminated with aluminum which is
a poison.
AVOIDING PROBLEMS
Use sea water, reconstituted sea water made from sea salt or Dead Sea salt,
or salt lake water. In general, start with a clean and deep source
of water. Some people have gone out to sea in boats to collect sea
water from 100 feet deep.
Generally avoid water that has lead, arsenic or other toxic elements in
it. Start with water that is drinkable except for salt content.
Conduct an elemental and toxic analysis of questionable starting-material
sources (such as seawater collected close to the shore, or near sources
of industrial waste runoff).
Boiling in lye water kills bacteria but it does not destroy toxic metals
or chemicals in your source water.
Follow these instructions and slowly change the pH of your solution.
Avoid water with sulfur or sulfates in it because such water produces little
or no m-state precipitate.
Never use aluminum containers or utensils because
aluminum will react with acids like HCl and alkalis like lye, and could
poison you
H2O (Water) can be converted into HHO, a gaseous unstable flammable form of water, by high voltage electricity (think millions of volts) or high frequency radio waves (about 13.56Mhz). Search “Kanzius burning sea water” and “Stanley Meyer” on YouTube. Modern electrical engineering denies this, but it’s been proven many times. Large areas of science, medicine, and archaeology are involved in cover-ups these days. (Search Michael Cremo and Dr. Royal Raymond Rife on Youtube) The total wattage used in the conversion to HHO is rather small, since high voltage electricity (or high frequency radio waves) produce huge gains in efficiency. This makes the conversion doable by the power generated from the alternator in your car. All power on Earth could be produced by burning sea water. However, if we start burning sea water instead of oil, then are we dooming ourselves even more? If we significantly reduce the amount of water on the planet, then it would cause mass extinctions of plants and animals and destroy humanity. So, let’s run the numbers and see how long it would take to reduce the amount of sea water by .1% (1/1000 reduction) Firstly, we’re losing water into space through the high atmosphere. The high end of this estimate is that the Earth has lost 1/4 of its water, about 22 billion gallons of water per year for the last 4 billion years. The low end estimate is that we’ve lost about .1% of our water into space, or 88 million gallons per year. (Google: Sciencenordic.com Earth losing water into space) So, if we lose another .1% of our sea water, then we should still be A-OK. We consume about 100 Trillion kWh of Energy every year (Known as our Final Energy Consumption). We burn about 1.5 trillion gallons of oil per year to produce 33% of the world’s power (including all sources: transportation, electricity production etc.) Therefore, we would have to burn about 4.6 trillion gallons of oil per year to produce all of the world’s energy from oil. Burning sea water is about 40 times more efficient than burning gasoline. (We’re going to ignore the oil lost in the refining process) The average MPG for gas engines is 25, and you can get about 1000 MPG burning sea water (because of the huge volume increase when you go from liquid H2O to gas HHO). Additionally, only about 5% of the HHO gas is actually burned. The other 95% recombines into water and drips out the exhaust pipe. So, to equal the power output of 4.6 trillion gallons of oil, we would have to burn 5.75 billion gallons of water per year. ( (4.6 Trillion / 40) / 20 = 5.75 billion ) There are approx. 352 quintillion gallons of water in the seas. .1% of this is 352 quadrillion gallons. So, how long would it take us to burn 352 quadrillion gallons of sea water? The answer is about 61 million years. (352 quadrillion / 5.75 billion). However, let’s say that the rest of the world’s living standard goes way up and our power consumption increases by 5 times. It would still take us about 12 million years to burn .1% of the sea water on Earth. But, let’s say we go really crazy with power consumption and we leave the lights on 24/7 and we all drive Hummers or Abrams tanks (.5 MPG with gas) and our energy consumption goes up by 100 times. It would still take us about 600,000 years to burn .1% of the sea water on Earth. If we can’t find a better energy solution than burning sea water in the next few hundred years, then honestly we deserve to go extinct. So, all in all, burning sea water is still a way better idea than burning oil. So, when will we have conversion kits that we can buy to convert our cars into running on sea water? Probably about 5 years after science pulls its collective head out of its mainstream butt, and when the government stops assassinating free energy inventors. And so, when will that be? Well that my friends, depends on you!
The Elites will not give up control of our world willingly. We need to recover from the toxic swamp of modern life and be strong and healthy to fight for our freedom and heal this world. We need to cleanse and heal our bodies, sharpen our minds, and supercharge our attitude and warrior spirit! Check out our collection of the most powerful almost unknown healing remedies we’ve ever found.
1. LOW COST Perhaps the most obvious reason to build with AirCrete is the enormous amount of money it will save you in construction, in maintenance and in keeping you cool during the summer and warm in the winter. AirCrete is simply the most practical, high-quality, low cost material there is. It plays a double function as structure and insulator. Millions of tiny closed air cells gives AirCrete its insulating properties. And you can form it to any thickness to suit your climate. Just one liter of dish detergent with 10 gals of water make enough foam to produce about 2 cubic meters or 70 cubic feet of AC. The foam expands the volume of cement by a factor of 5 - 7. It eliminates the need for aggregates, gravel, sand, or rock which are costly, take space on site and require heavy equipment to deliver and hard labour to work with. Domes are very energy efficient for several reasons. They enclose the most space with the least material. 40% of the energy loss in conventional structures is around the thermal bridges where studs, floors and roof meet the exterior walls. There are no thermal bridges in an AirCrete dome home. The seamless integration of floor, walls and roof eliminates outside air penetration and allows the natural flow of interior convection currents that make it easier to heat and cool.
2. ECOLOGY If you are concerned with our ecology like we are, then AirCrete will have a special appeal to you too. AirCrete has gained international recognition as an ecological building material because of it’s resource efficiency. It’s reduced environmental impact is only getting better as greener alternatives to portland cement continue to be developed.
3. FIREPROOF A small flame can become an inferno very quickly in a conventional wooden home. Once the fire penetrates the thin walls, the spaces between the stubs act like chimneys that allow the fire to easily spreads to the entire structure. And if the fire doesn’t destroy your stick frame house, the fire department likely will in the process of trying to extinguish the fire. AirCrete is fireproof. You can build a furnace with it. It will not burn. 4. WATER PROOF Water damage is a constant threat to wood, adobe, cob, straw bale, compressed earth and even metal buildings. AirCrete is waterproof, you can build a boat with it. It will not rot, rust or decompose in water. You might want to cover you home with vegetation, no problem! Put a sprinkler on top to keep it moist and cool in the summer, no problem! AirCrete is waterproof. 5. PEST PROOF Insects and rodents are another annoying threat. They find every nook, crack and cranny. Conventional homes are riddled with seams, joints and layers that invite pests. Regardless of the initial quality, as your home ages it becomes more accommodating to pests. In many parts of the world houses are fumigated with toxic chemicals to control termites, cock roaches and other pests. It’s an endless battle. I’m not sure what’s worse the pests or the chemicals. It’s a hopeless situation for most houses in the tropics. With tight windows and doors an AirCrete dome home is impervious to pest of all kind. It’s comforting to know that nothing is going to crawl into your bed while you sleep soundly. 6. SAFETY Natural disasters, earthquakes, hurricanes, tornadoes, forest fires, floods, volcanic eruptions - you name it, a dome is the strongest structural shape bar none. The fragile shell of an egg would crumble under the slightest pressure if it was flat. It’s incredible strength comes from it’s dome shape. A dome is strong because it distributes forces equally in all direction throughout it’s entire surface. Architects and engineers have know this for centuries. Some of the oldest standing buildings in the world are domes. “Sick house syndrome” is a term used to describe the ailments caused by the off gassing of modern construction materials. AirCrete is inert, it’s made of natural materials. And it’s a perfect base for the application of natural plasters. 7. ELEGANCE There is something intangible, freeing and uplifting that soothes your soul the moment you step into one of our dome homes. The graceful arches, round window and oval doorways are inspiring. They give you a sense of expansion as though you have entered a sacred space. AirCrete domes are extraordinary, they provide something that conventional buildings simply cannot. Your dome home will surrounded you with a secure sense of serenity. 8. EASE Most creatures build their home in a day. Yet many of us spend the best years of our lives in debt to our homes. It doesn’t have to be this way. Building an AirCrete dome home is easily achievable for most people. Especially if you do it with others. It’s easy to learn. And the tools we provide do most of the work for you. Work becomes play when we help each other. It will be one of your life’s most memorable events. Building your own home with friends and family is a deeply satisfying accomplishment that too few people experience. And still the greatest joy comes from living in it!
The amount of cement required for a cubic foot of AirCrete depends on the density of the AirCrete. A 94lb bag of cement produces about 40 gal or about 5.5 cubic feet or .15 cubic meters of AirCrete of a density of 19 lb per cubic foot. For more information see the cart below.
Nuclear reactors are just the most expensive steam engine
use the oceans to generate energy - how?
use geothermal energy with something with a lower boiling point than water... maybe alcohol? a form of alcohol that condenses at room temperature?
The Philippines currently has one of the most expensive electricity rates in Asia, but it is surrounded by ocean. Could we use this to give this country the cheapest power rates in Asia?
Frome in Somerset has seen a dramatic fall in emergency hospital admissions since it began a collective project to combat isolation. There are lessons for the rest of the country
It could, if the results stand up, be one of the most dramatic medical breakthroughs of recent decades. It could transform treatment regimes, save lives, and save health services a fortune. Is it a drug? A device? A surgical procedure? No, it’s a newfangled intervention called community. This week the results from a trial in the Somerset town of Frome are published informally, in the magazine Resurgence & Ecologist. (A scientific paper has been submitted to a medical journal and is awaiting peer review). We should be cautious about embracing data before it is published in the academic press, and must always avoid treating correlation as causation. But this shouldn’t stop us feeling a shiver of excitement about the implications, if the figures turn out to be robust and the experiment can be replicated.
What this provisional data appears to show is that when isolated people who have health problems are supported by community groups and volunteers, the number of emergency admissions to hospital falls spectacularly. While across the whole of Somerset emergency hospital admissions rose by 29% during the three years of the study, in Frome they fell by 17%. Julian Abel, a consultant physician in palliative care and lead author of the draft paper, remarks: “No other interventions on record have reduced emergency admissions across a population.”
Frome is a remarkable place, run by an independent town council famous for its democratic innovation. There’s a buzz of sociability, a sense of common purpose and a creative, exciting atmosphere that make it feel quite different from many English market towns, and for that matter, quite different from the buttoned-down, dreary place I found when I first visited, 30 years ago.
The Compassionate Frome project was launched in 2013 by Helen Kingston, a GP there. She kept encountering patients who seemed defeated by the medicalisation of their lives: treated as if they were a cluster of symptoms rather than a human being who happened to have health problems. Staff at her practice were stressed and dejected by what she calls “silo working”.
So, with the help of the NHS group Health Connections Mendip and the town council, her practice set up a directory of agencies and community groups. This let them see where the gaps were, which they then filled with new groups for people with particular conditions. They employed “health connectors” to help people plan their care, and most interestingly trained voluntary “community connectors” to help their patients find the support they needed.
Sometimes this meant handling debt or housing problems, sometimes joining choirs or lunch clubs or exercise groups or writing workshops or men’s sheds (where men make and mend things together). The point was to break a familiar cycle of misery: illness reduces people’s ability to socialise, which leads in turn to isolation and loneliness, which then exacerbates illness.
This cycle is explained by some fascinating science, summarised in a recent paper in the journal Neuropsychopharmacology. Chemicals called cytokines, which function as messengers in the immune system and cause inflammation, also change our behaviour, encouraging us to withdraw from general social contact. This, the paper argues, is because sickness, during the more dangerous times in which our ancestral species evolved, made us vulnerable to attack. Inflammation is now believed to contribute to depression. People who are depressed tend to have higher cytokine levels.
But, while separating us from society as a whole, inflammation also causes us to huddle closer to those we love. Which is fine – unless, like far too many people in this age of loneliness, you have no such person. One study suggests that the number of Americans who say they have no confidant has nearly tripled in two decades. In turn, the paper continues, people without strong social connections, or who suffer from social stress (such as rejection and broken relationships), are more prone to inflammation. In the evolutionary past, social isolation exposed us to a higher risk of predation and sickness. So the immune system appears to have evolved to listen to the social environment, ramping up inflammation when we become isolated, in the hope of protecting us against wounding and disease. In other words, isolation causes inflammation, and inflammation can cause further isolation and depression.
Remarkable as Frome’s initial results appear to be, they shouldn’t be surprising. A famous paper published in PLOS Medicine in 2010 reviewed 148 studies, involving 300,000 people, and discovered that those with strong social relationships had a 50% lower chance of death across the average study period (7.5 years) than those with weak connections. “The magnitude of this effect,” the paper reports, “is comparable with quitting smoking.” A celebrated study in 1945 showed that children in orphanages died through lack of human contact. Now we know that the same thing can apply to all of us.
Dozens of subsequent papers reinforce these conclusions. For example, HIV patients with strong social support have lower levels of the virus than those without. Women have better chances of surviving colorectal cancer if they have strong connections. Young children who are socially isolated appear more likely to suffer from coronary heart disease and type 2 diabetes in adulthood. Most remarkably, older patients with either one or two chronic diseases do not have higher death rates than those who are not suffering from chronic disease – as long as they have high levels of social support.
In other words, the evidence strongly suggests that social contact should be on prescription, as it is in Frome. But here, and in other countries, health services have been slow to act on such findings. In the UK we have a minister for loneliness, and social isolation is an official “health priority”. But the silo effect, budget cuts and an atmosphere of fear and retrenchment ensure that precious little has been done.
Helen Kingston reports that patients who once asked, “What are you going to do about my problem?” now tell her, “This is what I’m thinking of doing next.” They are, in other words, no longer a set of symptoms, but people with agency. This might lead, as the preliminary results suggest, to fewer emergency admissions, and major savings to the health budget. But even if it doesn’t, the benefits are obvious.
The town that’s found a potent cure for illness – community
Shares
Comments
589Frome is a remarkable place, run by an independent town council famous for its democratic innovation. There’s a buzz of sociability, a sense of common purpose and a creative, exciting atmosphere that make it feel quite different from many English market towns, and for that matter, quite different from the buttoned-down, dreary place I found when I first visited, 30 years ago.